|............ Products Center ............|

Product Name

Viscoelastic Tape, viscoelastic Tape、Visco ealstic Body Adhesive Tape、Non-crystalline Low-viscosity Polyolefin Based

Product Features

Saves time, surface preparation no need blasting and preheating, without applying epoxy primer

Super bonding to Steel, and any coating material include PE, PP, FBE and AE

Superior cathodic disbondment offers the optimum barrier long term protection against corrosion.

Self-healing ability when slightly damaged due to plastic-elastic properties

No flowing and dripping on maximum operation temperature

Impermeable to water and oxygen

Long shelf-life

Warranty Period

24 Months

Package Specification

Cartons+Pallets

Visco Ealstic Body Adhesive Tape

Environment Temperature Range

--

-60℃~50℃ (FJC 13A-1)

-60℃~70℃ (FJC 13A-2)

-60℃~95℃ (FJC 13A-3)

-60℃~120℃ (FJC 13A-4)

-60℃~50℃ (FJC 13B-1)

-60℃~70℃ (FJC 13B-2)

-60℃~95℃ (FJC 13B-3)

-60℃~120℃ (FJC 13B-4)

Glass transition temperature, ℃

ISO11357-2

<-60

<-60

Holiday detection

at 5 kV/ mm + 5 kV, max. 25 kV

ISO21809-3 Annex C

No holiday

No holiday

Adhesion test of reinforced compound with respect to steel and to plant coating before and after thermal ageing and before and after hot-water immersion, both for 100 days

to steel, at 23℃, Coverage, N/mm, %

to steel, at Tmax+20℃, Coverage, N/mm, %

to plant coating, at 23℃, Coverage, N/mm, %

to plant coating, at Tmax+20℃, Coverage, N/mm, %

ISO21809-3 Annex H

ISO21809-3 Annex I

Cohesive separation mode

0.08, >95

0.03, >95

0.07, >95

0.03, >95

Cohesive separation mode

0.08, >95

0.03, >95

0.07, >95

0.03, >95

Lap shear resistance, Cohesive separation mode Coverage

at 23℃, N/mm2

at Tmax+20℃, N/mm2

ISO21809-3 Annex I

0.006, >95

0.003, >95

0.006, >95

0.003, >95

Complete Coating

Indentation resistance, Test pressure, 1,0N/mm²

at 23℃, mm

at Tmax+20℃, mm

ISO21809-3 Annex E

1.2

0.7

13.5

0.7

Outer Material

ISO21809-3 Annex G

ISO21809-3 Annex C

Outer wrap — Polymeric tape

Outer wrap — Heat-shrinkable material

Peel strength to plant coating,Elastic modulus after thermal ageing

at 23℃, N/mm

at Tmax+20℃, N/mm

ISO21809-3 Annex H

1.26

0.13

1.2

0.3

Peel strength (P₁₀₀/P₀) to plant coating after hot water immersion for 100 days

at Tmax, max. 95 °C./at 23℃

ISO21809-3 Annex H

ISO21809-3 Annex I

0.87

0.87

Peel strength (P′₁₀₀/P′₀) outer wrap layer to outer wrap layer after thermal ageing for 100 days

at Tmax+20℃/at 23℃

ISO21809-3 M

0.57

0.57

Installation Instructions

1. Surface treatment

The surface rust of pipe body is removed by mechanical rust removal equipment (electric angle mill), and the derusting grade reaches ST2. After rust removal, the surface of the pipe body is dried by a heat blower.

2. Pipe body wrapped with viscoelastic anti-corrosion tape

Wrap a layer of viscoelastic anti-corrosion tape around the pipe section which has finished surface treatment, and the lap length between the end and the original coating shall not be less than 50mm. The minimum lap length of the joint of anti-corrosion tape is 10 mm. When wrapping the viscoelastic anti-corrosion tape, it is unnecessary to maintain a large tension, and press the edge and overlapping part of the tape by hand.

3. Flange and other special-shaped parts wrapped with viscoelastic anti-corrosion tape

For the anti-corrosion operation at the connection of valve flange, the connecting bolt can be filled with anti-corrosion paste and coated with viscoelastic anti-corrosion tape.

4. Wrapping outer protective tape

The basic operation method is the same as that of viscoelastic anti-corrosion tape, but the tension shall be maintained when wrapping the outer protective tape. The overlapping amount of joint part is 50%. The two ends of the anticorrosive pipe section shall be exposed 1-2mm respectively, and the outer protective tape shall not be wrapped.

5. Quality inspection

The quality requirements for installation of viscoelastic anti-corrosion tape and outer protective tape: the surface is flat, overlapping is even, and there is no bubble, wrinkle and damage.

Installation Picture

Apply Pictures